Arctic Freezer i13 X CO Compact Heatsink & Fan

Ready to cool your Intel CPU

The ARCTIC Freezer i13 X CO is a compact CPU cooler with one 92mm fan. It benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC was been able to significantly improve the Freezer i13 X CO’s cooling performance. With the use of a double ball bearing it is designed for continuous operation and is therefore also suitable for 24/7 operations. It is supplied with pre-applied ARCTIC MX-2 thermal compound and has a simple assembly system.

Small Footstep for Optimal Compatibillity

The Freezer i13 X CO combines a compact advanced heat sink design with 3 Direct Touch Heatpipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X CO has an installation height of only 137 mm and there are no limitations in RAM compatibility.

Pre-applied MX-2 Thermal Paste

Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

Longer Lifespan thanks to Lower Temperatures

The Freezer i13 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer i13 X CO.

Offset Heat Pipes enable Optimal Heat Dissipation

The direct touch heat pipes attached to the Freezer i13 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

P-fan for Increased Performance

Inspired by the P-series, the Freezer i13 X CO’s fan benefits from all of the advantages of P-fans:
• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibration
• PWM for synchronous fan control

Double Ball Bearing for Continuous Operation

The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.

Direct Touch Heat Pipes

The Freezer i13 X CO uses direct touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

10 % More Cooling Capacity

The ARCTIC Freezer i13 X CO sets new standards in cooling. Compared to its predecessor, a performance increase of almost 4 % could be tested.

Features

• 3 direct touch heat pipes
• Pre-applied MX-2 Thermal Paste
• 44 cooling fins
• Effective savings of 60 % in power consumption.
• 92mm fan P-fan for Increased Performance
• Dual Ball Bearing